USER AND MAINTENANCE MANUAL FOR TIN PIGGY BANK

Codes 100, 300, 400, 800
Version: 0 – Last revision date of the manual: 30-01-2024

Eurocom di Luca e Armando Russo sas
Sede: Traversa VI, via Villa Bisignano, 32 – 80147 – Naples (NA), Italy
P.IVA 07851030630 – Tel. ufficio +39 081 5720176
e-mail: info@moneki.it – Sito Web: www.moneki.it

Authorized assistance for this product is provided directly by Eurocom di Luca e Armando Russo SAS or by a technician appointed by the company. In case of need, please contact them using the information provided above.

MANUAL OVERVIEW

NOTE: UPON RECEIPT OF THE PRODUCT, BEFORE CARRYING OUT ANY OPERATION, PLEASE READ THIS MANUAL CAREFULLY.
This manual provides instructions for the use and maintenance of the piggy bank and is relevant to its technical lifespan after production and sale. Should the product be subsequently transferred to a third party for any reason (sale, loan, etc.), the product must be handed over with all related documentation.

Before performing any operation, the entire manual must be read thoroughly, and the sections relevant to the intended operations should be reviewed in detail.

This manual contains proprietary information and must not be shared, even partially, with third parties for any purpose or in any form without prior written consent from Eurocom di Luca e Armando Russo SAS.

Eurocom di Luca e Armando Russo SAS declares that the information in this manual aligns with the technical and safety specifications of the product to which it pertains.
An official copy of this manual is stored in the technical file maintained by Eurocom di Luca e Armando Russo SAS.

The company does not recognize any documentation not produced, issued, or distributed by itself or an authorized representative. This manual, along with the entire technical file, will be retained by the manufacturer for the legally required period. During this time, copies of the documentation accompanying the product at the time of sale may be requested. The full technical file will be available only to regulatory authorities during this period. After the stipulated time, the product and accompanying documentation must comply with current legal standards.

WARNINGS

This manual outlines general safety guidelines to be followed during any operation involving the product. The procedures described in subsequent sections must be carried out in accordance with both the specified methods and the general safety guidelines detailed in this chapter.

Different countries may have varying safety regulations. In cases where the manual’s guidelines conflict with or are less stringent than the regulations in the country of sale, the national regulations take precedence.

NOTE: THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ACCIDENTS OR DAMAGE CAUSED BY IMPROPER USE OF THE PRODUCT OR FAILURE TO FOLLOW THE SAFETY GUIDELINES AND PROCEDURES DESCRIBED IN THIS DOCUMENTATION.

Failure to adhere to the usage and maintenance guidelines outlined in this manual will also void the warranty.

DECLARATION OF CONFORMITY

The product is sold with this manual and a declaration of conformity prepared in compliance with applicable European regulations.
NOTE: IF THE PRODUCT IS TRANSFERRED TO A THIRD PARTY, ALL DOCUMENTATION MUST BE HANDED OVER WITH IT.

The piggy bank consists of a cylindrical tin container with a slot on the top for coin insertion. Once filled, the container can be opened using a can opener, after which it should be disposed of. The piggy bank is available in large, medium, small, and mini sizes with various graphic designs created using lithography.

The piggy bank is not a toy and does not require power to function.

TECHNICAL DATA

Variants:

Material: Steel
Packaging: Shrink-wrapped plastic (LDPE)

INTENDED USE

The piggy bank is designed to be used by adults as a container for collecting coins and/or as a decorative item. Once opened, the piggy bank must be disposed of.

PROHIBITED USE

The following uses are strictly prohibited:

• Applications not described in the “Description” and “Intended Use” sections.
• Using the product if it is damaged and/or deformed.
• Reusing the product after it has been opened.

NOTE: THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ACCIDENTS OR DAMAGE RESULTING FROM IMPROPER USE OF THE PRODUCT. UNAUTHORIZED USE ALSO VOIDS THE WARRANTY.

WARRANTY

During the design phase, the manufacturer, Eurocom di Luca e Armando Russo SAS, conducted an in-depth risk analysis of the product. This analysis identified certain inherent risks that could not be eliminated due to their nature. Each risk was carefully reviewed, and specific instructions for avoiding them are emphasized in this manual. It is therefore essential that anyone intending to use or maintain the product thoroughly reads the manual beforehand.

NOTE: THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY ACCIDENTS OR DAMAGES ARISING FROM IMPROPER USE OF THE PRODUCT DUE TO NEGLIGENCE BY THE USER.

Specific Restrictions:

• It is strictly forbidden to modify the product in any way. Any damages to persons, animals, or property resulting from unauthorized modifications absolve the manufacturer of any liability.
• Store this manual carefully, as it is essential for the proper and safe use of the product.
• If the product’s structure exhibits damage or breakage due to accidental impact, rendering it unsafe or unusable, contact authorized assistance and follow their recommendations.
• Do not allow children (under 14 years old) to use the product as a toy. It is not a toy.
• Do not allow individuals with limited cognitive abilities to use the product improperly.
• Dispose of packaging materials in accordance with the legislation applicable in the product’s location of use, as stated on the environmental label.
• Do not allow children access to the product’s packaging.

LOCATION REQUIREMENTS

Before positioning the product, consider the following factors:

• The piggy bank must be placed indoors on a horizontal, clean surface capable of supporting its weight, including the weight of the coins deposited inside.
• Ensure the product is not exposed to steam jets or corrosive liquids in its operating environment.
• Ensure the product is kept away from open flames, heat sources, and weather elements.

HANDLING

Upon receipt of the product, inspect its integrity and all components. Report any damage, missing parts, deformation, or signs of transport impact to the manufacturer before proceeding with any operation.

The weight and dimensions of the product allow for manual handling by a single operator.

USAGE

Damage Inspection:

Verify that the product and its components are free from physical damage, such as impacts or abrasions. Pay particular attention to the following:

• Ensure there are no dents or marks indicative of transport damage.
• Check for signs of mold.
• Ensure no components show signs of rust.

If any physical damage is detected, cease using the product and report the issue to the manufacturer’s customer support team.

Proper Use:

Do not allow children (under 14 years old) to use the product as a toy. It is not a toy.Non è un giocattolo.
Do not allow individuals with limited cognitive abilities to use the product improperly.
Once opened, the product must be disposed of.

Instructions for Use:

Insert coins into the slot located on the top of the piggy bank. The piggy bank can also serve as a decorative item to enhance your space.
To open the piggy bank, use a can opener (a kitchen tool commonly used to open canned goods) to remove the top of the container. Refer to the can opener’s user manual for proper and safe use.
Once opened, the piggy bank cannot be resealed and must be disposed of as outlined in the “Disposal” section of this manual.

STORAGE

When not in use, store the product in a dry environment away from direct sunlight, weather elements, heat sources, open flames, dust, liquids, and humidity.

• Storage temperature range: +30°C to -5°C
• Humidity conditions: 0% to 80%

MAINTENANCE

Maintenance operations must be performed by personnel who have thoroughly read the manual. Strictly adhere to the instructions provided in this manual during maintenance activities.

For all maintenance and cleaning tasks, observe general safety regulations and any additional workplace safety guidelines applicable in your location.

Regularly or as needed, clean the product to remove accumulated dust and dirt from its external surface.

WARNING: Do not use harsh chemical detergents, abrasive sponges, or cloths, as these may irreversibly damage the product. Use a soft, dry cloth or a mild detergent to clean the surface gently.

DISPOSAL

The possibility of reusing certain product components is the sole responsibility of the user.

For instructions on disposing of the packaging, refer to the product’s environmental label.
Do not dispose of the packaging or the product inappropriately or in the environment.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY USING THE PRODUCT OUTSIDE ITS SPECIFIED SCOPE OR FOR REUSING PARTS OF THE PRODUCT AFTER DISPOSAL.

WARRANTY

The warranty applies only if the product is used under the conditions outlined in this manual. It does not cover damages resulting from improper use, negligence, or poor storage.

The products we sell are covered by warranty under the following conditions::

1. The warranty is valid for a period of 12 months for professional buyers and 24 months for end consumers.
2. The manufacturer commits to replacing defective components at its discretion, only after a thorough inspection and confirmation of a manufacturing defect.
3. Transportation and/or shipping costs are covered by the manufacturer if a manufacturing defect is confirmed, and the warranty is correctly applied. Transportation and/or shipping costs are always borne by the buyer in cases of misuse of the warranty or if no manufacturing defect is found.
4. Defective products returned and replaced during the warranty period become the property of the manufacturer.
5. This warranty applies exclusively to the original purchaser who has adhered to the normal use, cleaning, and storage guidelines outlined in the manual. The manufacturer’s liability under the warranty ceases if the original purchaser transfers ownership of the product or modifies it.
6. The warranty does not cover damages resulting from excessive stress, such as using the product after detecting an anomaly, employing inappropriate operating methods, or failing to follow the usage instructions.
7. The manufacturer assumes no responsibility for disputes arising from the resale of the product by the original purchaser or its subsequent use in a different country, subject to the regulations in force in the country of sale.
8. This warranty applies only upon the return of the defective product to the manufacturer by the original purchaser.

Notice: If you need to claim the warranty, please provide the following information:

1. Product type
2. Purchase date (with proof of purchase)
3. Detailed description of the issue

NOTE: FAILURE TO FOLLOW THE USAGE GUIDELINES OUTLINED IN THIS DOCUMENT WILL VOID THE WARRANTY.